Draw-tite 65030 FRONT MOUNT RECEIVER Bedienungsanleitung PDF herunterladen

Front Mounted Receiver

Installation Instructions

Ford Explorer

Ford Sport Trac

Part Numbers:

65030

1. Remove plastic air dam.

2. If present, remove OEM tow hooks and frame bracket reinforcements. Return frame bracket reinforcements to vehicle owner for

reinstallation if receiver is removed.

3. Remove existing nut & install angle bracket to bumper bolt as shown. Angle bracket must be installed.

4. Raise receiver into position from below.

VEHICLES WITH OEM TOW HOOKS

5. Sandwich receiver between frame bracket & tow hook and attach with 2-1/4” carriage bolts provided.

VEHICLES WITHOUT OEM TOW HOOKS

6. Attach with 1-3/4” carriage bolts provided.

7. Reinstall air dam.

Tighten all 1/2” GR5 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

Rev. A11-07-05N65030Sheet 1 of 3

z 2005 Cequent Towing Products

Hex Nut, 1/2”Qty. (4)

Spacer, 1-1/2” x 2” x 1/4”Qty. (2)

Conical Washer, 1/2”Qty. (4)

Carriage Bolt, 1/2”-13 x 2-1/4”Qty. (4)

Angle BracketQty. (2)

Carriage Bolt, 1/2”-13 x 1-3/4”Qty. (4)

Tighten all M10 CL8.8 fasteners with torque wrench to 53 Lb.-Ft (72 N-m).

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Equipment Required:

Wrenches: 8mm, 10mm,

15mm, 7/8”

Drill Bits: None

Fastener Kit: F65030

Receiver Shown In Proper Position

Frame Rail

Fascia

WITHOUT OEM

TOW HOOKS

WITH OEM

TOW HOOKS

Remove Frame Bracket

Reinforcements

Frame Rail

OEM Tow Hook

Frame Bracket

Bumper Bolt

(Existing)Nut (Existing)

CARGO CAPACITY – DO NOT EXCEED

300 LB. OR VEHICLE FRONT GROSS

AXLE WEIGHT RATING. (GAWR)

LB. MAX. WINCH LINE PULL

9000

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Front Mounted ReceiverInstallation InstructionsFord ExplorerFord Sport TracPart Numbers:650301. Remove plastic air dam.2. If present, remove OEM tow h

Seite 2 - Instructions d’installation

Récepteur à montage sur l’avantInstructions d’installationFord ExplorerFord Sport TracNuméro de pièce :650301. Enlever la jupe avant de plastique.2. S

Seite 3 - Instrucciones de instalación

Receptor frontalInstrucciones de instalaciónFord ExplorerFord Sport TracNúmeros de partes:650301. Retire la barrera de aire plástica.2. Si están prese

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 65030 FRONT MOUNT RECEIVER Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 65030 FRONT MOUNT RECEIVER herunter. Draw-Tite 65030 FRONT MOUNT RECEIVER User Manual [ru] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 65030 FRONT MOUNT RECEIVER