Draw-tite 118401 T-ONE CONNECTOR Bedienungsanleitung PDF herunterladen

4. Locate a suitable grounding point near

the connector such as the vehicle's

frame or cross member. (Do not drill

into vehicle floor or bed.) Clean dirt and

rustproofing from area. Drill a 3/32" hole

and secure

white wire using eyelet and

screw provided.

CAUTION

Verify what is behind any surface prior

to drilling to avoid damage to the vehicle

and/or personal injury. Do not drill into

any exposed surfaces.

5. Mount the T-Connector black box using

double-sided tape provided. Secure the

remainder of the T-Connector harness

with the cable ties provided, to prevent

damage or rattling and being careful to

avoid any areas that would pinch, cut

or melt the wire.

WARNING

All connections must be complete for the

T-Connector to function properly. Test and

verify installation with a test light or trailer

once installed.

WARNING

Overloading circuit can cause fires.

DO NOT exceed lower of towing

manufacturer rating or:

• Max. stop/turn light: 1 per side (2.1 amps)

• Max. tail lights: (5 amps)

Read vehicle's owners manual &

instruction sheet for additional information.

Installation Instructions

Directives de Montage

Instrucciones de Instalación

T-Connector

Connecteur en T

Conector en T

18401-037 Rev. A 03/22/05

ENGLISH

TOOLS REQUIRED:

Philips Head Screwdriver, Drill (3/32" Drill Bit)

1. Underneath the vehicle, on the

passenger’s side, between the bumper

and rear tire, locate the vehicle Tow-Plug

harness

. It will have a connection

point matching the T-Connector harness.

Remove protective cap, being careful not

to break the locking tabs. All connector

surfaces should be clean and free of dirt.

2. Insert the T-Connector harness into

the vehicle’s Tow-Plug harness and lock

into place. Be careful not to damage the

locking tabs and be sure that connectors

are fully inserted with locking tabs in place.

3. Route the T-Connector harness rearward

to the back of the fascia of the bumper.

Route the T-Connector harness along

the inside of bumper toward the center

of vehicle

WARNING

Route the wire being careful to avoid

any hot pipes, heat shields, the fuel

tank or any other points that may

pinch or break the wire.

READ THIS FIRST:

Read and follow all instructions carefully

before beginning installation.

LISEZ CECI EN PREMIER:

Lire et suivre toutes les instructions

attenrivement avant le montage.

LEA ESTO PRIMERO:

Lea y siga todas las instrucciones cuida-

dosamente antes de iniciar la instalación.

•

1 2

18401-037 Rev. A 03/22/05 1

Inhaltsverzeichnis

Seite 1 - 18401-037 Rev. A 03/22/05

4. Locate a suitable grounding point near the connector such as the vehicle's frame or cross member. (Do not drill into vehicle floor or bed.) Cl

Seite 2

ESPAÑOLHERRAMIENTAS NECESARIAS:Destornillador de estrella, Taladro (broca de 3/32"")1. Por debajo del vehículo, en el costado del pasajero,

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 118401 T-ONE CONNECTOR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 118401 T-ONE CONNECTOR herunter. Draw-Tite 118401 T-ONE CONNECTOR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 118401 T-ONE CONNECTOR