Draw-tite 75550 MAX-FRAME RECEIVER Bedienungsanleitung PDF herunterladen

Installation Instructions

GMC & Chevrolet

2500HD / 3500 / 3500HD

Sierra & Silverado Trucks,

Classic & New Body - All

(Requires factory bumper & brackets)

Part Numbers:

75550

44577

87442

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 3/4, 21 mm, 22mm

Drill Bits: None

Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Rev. B5-17-0775550NSheet 1 of 1

z 2007 Cequent Towing Products

Conical Washer 1/2Qty. (2)Lock Washer 9/16Qty. (4)

Hex Nut 1/2-13Qty. (2)Flat Washer 9/16Qty. (12)

Carriage Bolt 1/2-13 X 1-3/4Qty. (2)

Block, 1/4” X 1-1/2” X 3”Qty. (2)Bolt M14 X 2.00 X 40mmQty. (4)

Tighten M14 CL10.9 fasteners with torque wrench to 115 Lb.-Ft. (156 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75550F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

600lb. (272 Kg)6000lb. (2724 Kg)

Weight Carrying

Ball Mount

1100lb. (499 Kg)11,000lb. (4990 Kg)

Weight Distributing

Max Tongue

Max Gross

Trailer WT

Hitch type

Wiring Access Location: PU3

Form: F205 Rev A 5-6-05

Note: All Fasteners Typical Both Sides of Vehicle

Note: factory installed

steel step bumper and

bumper brackets must

be used with hitch.

Bumper

Frame

Existing weldnuts,

typical both sides

Installation Instructions

Truck

frame

Bumper

bracket

Bumper

as needed to fit

bumper height

variations.

x (0 – 4) per side

Fasteners: typical both sides of vehicle.

1. Remove existing M14 bolts from end of each truck frame rail.

2. Lift hitch into position, locating rearmost slots in hitch under existing weldnuts in truck frame.

3. It may be necessary to install (1 – 4) 9/16” flat washers per side between hitch and bumper attachment

as needed for variations in bumper height.

4. Install new M14 bolts through hitch into weldnuts in truck frame and into step bumper.

5. Install remaining fasteners as shown.

Installation Instructions 1

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsGMC & Chevrolet 2500HD / 3500 / 3500HD Sierra & Silverado Trucks,

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 75550 MAX-FRAME RECEIVER Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 75550 MAX-FRAME RECEIVER herunter. Draw-Tite 75550 MAX-FRAME RECEIVER User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 75550 MAX-FRAME RECEIVER