Draw-tite 36424 FRAME HITCH Bedienungsanleitung PDF herunterladen

Installation Instructions

Jeep Wrangler

Jeep Wrangler Unlimited

Part Numbers:

36424

90157

06448

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 3/4”

Drill Bits: None

Crossmember

For vehicles with OEM Tow Hook: Tow hook must be permanently removed for hitch installation.

1. Lower exhaust. (If required)

2. Raise hitch into position.

3. Install fasteners as shown above.

4. Reinstall the vehicle exhaust. (If required)

Rev. A8-23-0636424NSheet 1 of 3

z 2006 Cequent Towing Products

Conical WasherQty. (4)

Hex Bolt 1/2-13 X 4.50Qty. (4)

Tighten all 1/2-13 GR5 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 36424F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Wiring Access Location: TBA

Crossmember

Bumper

Spare tire

Drawbar must be used in

the Drop position only.

Drawbar Kit:

36071

Optional

36078

3500 LB (1589 Kg) Max Gross Trailer Weight

300 LB (136 Kg) Max Tongue Weight

Form: F205 Rev A 5-6-05

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsJeep Wrangler Jeep Wrangler Unlimited Part Numbers:364249015706448

Seite 2 - Instructions d’installation

Instructions d’installationNuméros de pièces :Attelage montré dans la position appropriéeÉquipement requis :Clés : 3/4”Mèche : AucuneRev. A8-23-063642

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónNúmeros de partes:El enganche se muestra en laposición correctaEquipo necesario:Llaves: 3/4”Brocas de taladro: NingunaRev