Draw-tite 24816 SPORTFRAME HITCH Bedienungsanleitung PDF herunterladen

24816

Installation Instructions

Mazda 3

including Speed 3

Part Numbers:

77188

60201

Hitch Shown In Proper Position

Wiring Access Location: PC3, PC4

Equipment Required: Flat blade Screwdriver, Fishwire (provided).

Wrenches: 11/16”

Drill Bits: 1/2”

Rev A5-28-0824816NSheet 1 of 3

z 2006, 2007, 2008 Cequent Towing Products

7/16”-14 HEX NUTQty. (4)

BLOCK 1/4” X 1” X 3”Qty. (4)

7/16” CONICAL TOOTHED WASHERQty. (4)

7/16”-14 X 1-1/4” GRADE 5 CARRIAGE BOLTQty. (4)

Tighten all 7/16” fasteners with torque wrench to 50 Lb.-Ft. (68 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

2000 LB (908 kg) Max Gross Trailer Weight

200 LB (91 kg) Max Tongue Weight

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Drawbar must be used in the

RISE

position only.

Drawbar Kit:

3592

Fastener Kit: 24816F

Form F206 Rev A 5605

1. Use 1/2” drill bit to enlarge the four existing attachment holes.

2. With the flat blade screwdriver remove and retain (2) plastic push rivets that attach lower fascia supports to vehicle.

3. Fishwire carriage bolts and blocks through ends of the bumper as shown in Figure 1.

4. Position hitch as shown in Figure 2.

5. Fishwire carriage bolts and blocks through ends of the bumper mounts as shown in Figure 2.

6. Tighten all fasteners.

7. Replace plastic rivets removed in Step 2.

BUMPER

FISHWIRE

FIGURE 1.

BUMPER MOUNT

FISHWIRE

BUMPER

FASCIA

BUMPER

MOUNT

24816U

USE THIS

SLOT FOR

4 - DOOR

MODELS

USE THIS

SLOT FOR

5 - DOOR

MODELS

AND

SPEED 3

BUMPER MOUNT

BRACKET ENLARGED

FIGURE 2.

FIGURE 3.

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

24816Installation InstructionsMazda 3including Speed 3Part Numbers:7718860201Hitch Shown In Proper PositionWiring Access Location: PC3, PC4Equipment R

Seite 2 - Instructions d’installation

60201Instructions d’installationMAZDA 3 y compris Speed 3.Numéros de pièces :7718824816Attelage montré

Seite 3 - Instrucciones de instalación

60201Instrucciones de instalaciónMAZDA 3 Incluye Velocidad 3Números de partes:7718824816El enganch

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 24816 SPORTFRAME HITCH Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 24816 SPORTFRAME HITCH herunter. Draw-Tite 24816 SPORTFRAME HITCH User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 24816 SPORTFRAME HITCH