Draw-tite 75902 MAX-FRAME RECEIVER Bedienungsanleitung PDF herunterladen

Installation Instructions

Nissan Rogue

Part Numbers:

75902

87663

44712

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 18 & 19mm

Drill Bits: None

1. Remove and return factory tow hook and fasteners to vehicle owner.

2. Raise hitch into position on driver’s side and loosely install center fastener as shown, installing hex bolt and conical washer thru

elongated hole in hitch into vehicle frame. Raise hitch into position on passenger side and loosely install center fastener as

shown, installing hex bolt and conical washer thru elongated hole in hitch into vehicle frame. Center hitch on vehicle and install

remaining hardware as shown.

z 2014 Cequent Performance Products – Printed in Mexico

Sheet 1 of 3 75902N 4-16-14 Rev. A

Qty. (5) Hex Bolt M12 x 1.25 x 35mm CL8.8

Qty. (5) Conical Washer ½”

Tighten all M12 x 1.25 CL8.8 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 75902F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Hitch type

Max Gross

Trailer WT (LB)

Max Tongue

WT (LB)

Weight Distribution

Not to be used with Spring bars

Weight Carrying

Ball Mount

3500 (1590 Kg) 350 (159 Kg)

Wiring Access Location: SUV3 & 4

Form: F205 Rev A 5-6-05

Fasteners typical for all

mounting locations

2121

Vehicle Frame

Factory Tow Hook

Accessory Rating

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation InstructionsNissan RoguePart Numbers:75902 87663 44712Hitch Shown In Proper PositionEquipment Required:Wrenches: 18 & 19mmDrill Bits:

Seite 2 - Instructions d’installation

Instructions d’installationNuméros de pièces :Attelage montré dans la position appropriéeÉquipement requis :Clés : 18 et 19 mmMèches : Aucunez 2014 Ce

Seite 3 - Instrucciones de instalación

Instrucciones de instalaciónNúmeros de partes:El enganche se muestra en la posición correcta Equipo necesario:Llaves: 18 & 19mmBrocas de taladro: