Draw-tite 63153 CARGO CARRIER - FIXED 2 Bedienungsanleitung PDF herunterladen

63153N Rev C 9-16-09

Cequent Performance Products, Inc

47774 Anchor Ct W.

Plymouth, MI 48170

FIG. 1

TOOLS REQUIRED

13MM WRENCH

19MM WRENCH

TORQUE WRENCH

INSTALLATION INSTRUCTIONS

CARGO CARRIER

Product No.

63153

63155

ASSEMBLE TRAY

a. Place tray on a flat surface with the cargo mesh floor facing up as shown. Slide the two halves together and attach the two

steel plates to the upright bars with the logo label to the outside as shown using the M8 hex bolts as shown in Figure 1.

(Both Sides) IMPORTANT:

Leave these bolts loose at this time. It will be easier to attach the support tube to the cargo

basket the next step.

b. Place the support tube in between the two support rails on the bottom of the tray. Attach the tube to the bottom of the tray using

the

M12 X 55mm long (63155) or M12 X 80mm long (63153) hex bolts as shown in Figure 1.

c. Tighten all bolts. Torque M12 CL9.8 bolts to 75 ft•lb. Torque M8 CL9.8 bolts to 25 ft•lb.

LOADING: Load the Cargo Carrier so that most of the weight is in the center of the platform. Maximum load rating is 500 lb.

with a 5,000 lb. weight carrying hitch, and 300 lb. with a 3,500 lb. weight carrying hitch hitch.

CORRECT INCORRECT

FIG. 3

IMPORTANT NOTE: If the Cargo Carrier or cargo blocks the license plate, you can mount the license plate directly to the back of

the Cargo Carrier. Use the license plate as a template to mark two holes to drill. Diameter of the holes will depend on the screws

(not included) you are using, but should not exceed 1/4“ diameter (6.35mm).

M8 X 20mm LG. CL9.8

FLAT WASHER

LOCK NUT

(8) PLACES

M12 X 80mm LG. CL9.8 (63153)

M12 X 55mm LG. CL9.8 (63155)

LOCKNUT

(3) PLACES

Support Tube

FIG. 2

SHANK MUST BE USED IN THE RISE POSITION ONLY

STEEL

PLATE

UPRIGHT

BAR

WARNING: With a 5000 lb. rated receiver the cargo carrier can carry a maximum 500 lb. load, with a 3500 lb. rated receiver it

can carry a maximum 300 lb. load. DO NOT EXCEED lower of vehicle mfg’s or hitch mfg’s maximum tongue

weight rating.

WARNING: Not for transport of people, animals, or flammable liquids.

WARNING: If the load or cargo carrier blocks or impairs visibility of the taillights or turn signals, the optional light kit must be used.

WARNING: If the cargo carrier or the contents being transported is in line with the exhaust outlet, an exhaust tip must be used to

redirect the exhaust flow away from the cargo platform or contents.

WARNING: Do not lubricate threads. Bolt failure may occur due to over tightening.

WARNING: Securely fasten load to cargo carrier. Attach straps and/or tie down hooks to the tubular frame of cargo carrier.

WARNING: Do not attach tie down straps or hooks to the mesh cargo floor. Do not over-tighten ratcheting straps, damage to

cargo carrier may result from over-tightening.

WARNING: Do not carry any loads wider than your vehicle.

WARNING: Do not drill (except where specified for license plate mounting) or weld to this product.

WARNING: Relocate license plate if blocked by load or cargo carrier.

Printed in XXXXX

1 2 3

Inhaltsverzeichnis

Seite 1 - Product No

Seite 2 - PORTE-BAGAGES

Seite 3 - Producto No

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 63153 CARGO CARRIER - FIXED 2 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 63153 CARGO CARRIER - FIXED 2 herunter. Draw-Tite 63153 CARGO CARRIER - FIXED 2 User Manual [en] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 63153 CARGO CARRIER - FIXED 2