Draw-tite 20269 WIRING ADAPTER Bedienungsanleitung PDF herunterladen

18269-037 Rev. A 03/21/07

ENGLISH

TOOLS REQUIRED:

Trim Panel Remover

1. Carefully remove vehicle trim panel

underneath dash making sure not to pull

on courtesy lamp wires that are attached

2. Locate the vehicle’s electric brake control

harness connector

. The harness will be

located underneath the dash and left of the

steering column, taped to another harness

near the emergency brake pedal. There will

be a 6-pin connector that mates with the one

on the adapter.

3. Plug the brake control adapter into the

vehicle electric controller connector

Use butt connectors and attach the wires

from the adapter to the corresponding

wires on the electric brake control,

following the brake control manufacturer's

installation instructions.

4. Complete the installation per the electric

brake control manufacturer’s instructions

and mount the unit as directed. Perform

test procedures as instructed.

NOTE

Vehicles not equipped with OEM trailer tow

package, may require fuses and relays to

complete output and battery feed circuits

(sold separately). Consult owners manual

for locations.

WARNING

Overloading circuit can cause fires.

DO NOT exceed lower of towing

manufacturer rating or:

• Max. 4 AXLES: 8 BRAKES (24 amps)

Read vehicle's owners manual &

instruction sheet for additional information.

Installation Instructions

Directives de Montage

Instrucciones de Instalación

Electronic Trailer Brake Control

Wiring Adapter

Adaptateur pour câblage de commande

de frein de remorque électrique

Adaptador del cableado de control

eléctrico del remolque

•

READ THIS FIRST:

Read and follow all vehicle warnings and installation

instructions before beginning installation. Wear safety

glasses and use all safety precautions during installation.

LISEZ CECI EN PREMIER:

Lire et observer toutes les consignes de sécurité et les

instructions avant de commencer l’installation. Durant

l’installation, veiller à toujours porter des lunettes de

protection et respecter les mesures de sécurité.

LEA ESTO PRIMERO:

Lea y siga todas las advertencias e instrucciones de

instalación del vehículo antes de empezar la instalación.

Use gafas de seguridad y todas las precauciones de

seguridad durante la instalación.

TRAILER BRAKE CONTROLLER (OUTPUT)

CONTRÔLE DE FREIN DE REMORQUE (SORTIE)

CONDUCTOR DEL CONTROLADOR DE FRENO

(SALIDA) AL FRENO ELÉCTRICO DEL REMOLQUE

GROUND

MISE À LA TERRE

TIERRA

FUSED TRAILER BRAKE CONTROLLLER

BATTERY FEED

ALIMENTATION À FUSIBLE DE

LA BATTERIE AU CONTRÔLE DE FREINS

CONDUCTOR (CON FUSIBLE) DE

LA BATERIA AL CONTROLADOR

DEL FRENO DEL REMOLQUE

Wiring Adapter Housing (containing Male Terminals) - Wire Side

Logement de l'adaptateur de câblage (contenant les bornes mâles) - Côté fil

Protector del adaptador de cables (contiene los terminales machos) - Alambre el lado

VEHICLE STOP LAMP SWITCH TO BRAKE CONTROLLER (INPUT)

COMMUTATEUR DE FEUX D'ARRÊT DU VÉHICULE AU CONTROLE DE FREINS

INTERRUPTOR DE LUCES DE FRENADO DEL VEHICULO AL CONTROLADO DE FRENO (ENTRADA)

•

1 2

Inhaltsverzeichnis

Seite 1 - Instrucciones de Instalación

18269-037 Rev. A 03/21/07ENGLISHTOOLS REQUIRED:Trim Panel Remover1. Carefully remove vehicle trim panel underneath dash making sure not to pull on cou

Seite 2 - FRANÇAIS

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 20269 WIRING ADAPTER Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 20269 WIRING ADAPTER herunter. Draw-Tite 20269 WIRING ADAPTER User Manual [es] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 20269 WIRING ADAPTER