Draw-tite 65063 FRONT MOUNT RECEIVER Bedienungsanleitung PDF herunterladen

Installation Instructions

Dodge RAM 2500/3500

w/ Factory Tow Hook Package

Part Numbers:

65063

Hitch Shown In Proper Position

Equipment Required: Tape

Wrenches: 11/16”, 17mm

Drill Bits: None

Note: During the installation, it is recommended to cover the edges of the fascia opening to protect the chrome/paint as shown in Figure 1.

1. Remove factory tow hooks and fasteners from vehicle, set tow hooks aside and return fasteners to customer.

2. Before raising hitch into position insert provided fasteners through tow hooks as shown in Figure 2.

3. Raise hitch into position and align with holes in tow hook mounting bracket.

4. Raise tow hook into position and insert fasteners through hitch brackets and into the tow hook mounting bracket.

5. On the reverse side of tow hook mounting bracket install fasteners as shown in Figure 3.

Tighten all M10 fasteners with torque wrench to 53 Lb.-Ft.

Qty. (8) M10 X 1.50 X 60 CL 10.9 Hex Bolt

Qty. (8) M10 X 1.50 CL 10 Hex Nut

Qty. (16) 3/8” Conical Washer

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to prevent

entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working beneath a

vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and

SAE J684.

Fastener Kit: 65063F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Form: F205 Rev C 9-17-2012

CARGO CAPACITY – Do not exceed

500 LB. or Truck Front

Gross Axle Weight Rating, (GAWR).

9,000lb.

MAXIMUM WINCH LINE PULL

Fascia

jkkl

Figure 2: OEM Tow Hook Assembly

Figure 3: Hitch Installation

Tow Hook

Mounting Bracket

Receiver Tube

Figure 1: Fascia Opening

Protect Perimeter

of Fascia Opening

Note: When attaching accessories make sure not to over insert shank into receiver tube, doing so may damage the radiator.

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Installation Instructions Dodge RAM 2500/3500 w/ Factory Tow Hook Package Part Numbers: 65063 Hitch Shown In Proper Position Equipment Required: Tape

Seite 2 - Instructions d’installation

Instructions d’installation Dodge RAM 2500/3500 avec ensemble de crochet de remorquage d'origine Numéro de pièce : 65063 Attelage montré dans la

Seite 3 - Instrucciones de instalación

Instrucciones de instalación Dodge RAM 2500/3500 con Paquete de gancho de remolque de fábrica Números de partes: 65063 El enganche se muestra en la po

Kommentare zu diesen Handbüchern

Keine Kommentare

Draw-tite 65063 FRONT MOUNT RECEIVER Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Draw-tite 65063 FRONT MOUNT RECEIVER herunter. Draw-Tite 65063 FRONT MOUNT RECEIVER User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Draw-tite 65063 FRONT MOUNT RECEIVER